The surface must be clean, free of grease, dust and rust. Old and cracked paints have to be removed.
Lacquers and paint residues in good condition have to be polished.
In the case of absorbent substrates, such as wood, a primer must first be applied to prevent the resin of the lacquer from spreading to the substrate.
A pre-coat of fine-spray lacquer can also be applied to seal the absorbent surfaces.
Before using, shake the can (1 - 2 minutes) until the mixer ball is heard.
Apply the material with an even coat.
For small surfaces, the product can also be sprayed in a circular motion.
The product must be applied at a distance of 20 - 30 cm. In order to avoid any blockage, keep the can down after use and briefly spray only gas. Depending on the temperature, humidity and thickness of the layer, the product dries to the touch after approx. 20 - 30 minutes.
After use, invert the can and spray until only gas comes out to clean the valve.
Validate your login