Convertidor Booster Victron Buck-Boost DC/DC 50 A

Victron Buck-Boost DC/DC Booster Converter 50 A

DC/DC Converter 50A Buck-Boost Victron Energy
Input voltage range: 10-30V
Output voltage range: 10-30V
Maximum charging current: 12V - 50A // 24V - 25A
Dimensions: 213 x 120 x 30mm
The DC-DC Buck-Boost Converter is a DC-DC converter for charging 12V or 24V auxiliary batteries in vehicles with a smart alternator. Since when the engine is running, these alternators (powered by the on-board electronics of Euro 5 and 6 engines) do not always output the correct charging current, it is essential to have a DC-DC converter to charge the auxiliary battery. properly.

DC-DC converter for charging 12V or 24V auxiliary batteries in vehicles with Smart alternator (regenerative braking, Euro 5 and Euro 6 engines)

The DC-DC Buck-Boost converter is a converter for charging 12V or 24V auxiliary batteries in vehicles with an intelligent alternator. The converter will charge the auxiliary battery with a preset voltage, which eliminates high (eg Mercedes: 15.4V) or low voltages.
“Engine running” detection system
The built-in "engine running" detection system prevents deep discharge of the vehicle's starting battery.
In addition to this detection system, the drive can also be activated via a programmable input (D+, CAN bus or (+)15 connection).
fully programmable
The drive can be fully programmed using a simple and easy to use PC application. (A USB Type A male to USB Type B male cable is required.)
One product for 12V, 24V and 12/24V systems
The converter can be programmed to charge 12V or 24V auxiliary batteries from a 12V or 24V starter battery and alternator.
Charging current and inrush current limiter