Linnepe Slide-Port Trigger camper 170 Kilos motorcycle carrier

Custom made. Previous payment made and CALL before to confirm with EUROTETE. Consult at 680.28.58.48 or by whatsApp.

Linnepe motorcycle carrier special for Camper / Furgo / Van.
Fit for Fiat Ducato X-250, Peugeot Boxer and Citroen Jumper + 2006
But keep in mind that there are 2 references according to the length of the camper with an overhang of 1000 mm:
- Less than 6 meters (this reference 46625)
- More than 6 meters (it is ANOTHER reference 46626 with the increase of 100 euros) and also possible with + overhang of 1380 mm (optional).

Detachable Linnepe motorcycle carrier as it comes with clips and pin (time of 2 minutes)
It is NOT necessary to pass the ITV.
Motorcycle carrier system for cargo made mainly of aluminum.

Transport of 1 scooter or motorcycle
Easily slide out even when loaded so the right rear door can be opened
The rear doors can be opened when there is no motorcycle, that is, with the motorcycle carrier unloaded.
Equipped with quick-release fasteners for tool-free assembly and disassembly
The loading ramp is placed in a drawer under the conveyor.
Dimensions approx. W 200 x D 65 cm
Payload up to 170 kg
Approximate weight 59 kg

Scope of supply:
- Entry rail wedge ramp to raise and place the motorcycle.
- Front wheel support
- Handlebar tensioning belt
- 4 mooring screw rings
- 2 straps or tensioning belts, length 2 meters
- 2 straps or tensioning belts to secure the wheel.

Dimension: 1900 x 650 mm.
Payload up to 170 Kilos
CE TUV approval.
Complete motorcycle carrier with pilots.
13 pin pineapple.

Note: The electrical cord set must be ordered separately.
Pre-assembled electrical system on the motorcycle carrier (the vehicle's own will be missing)