6 rail strips for LED mounting on Thule Omnistor 6300 / thule 6200 / thule 9200 canopy

By ORDERfast delivery. Previous payment made online. Please contact us at 680285848 or by whatsApp.

This caravan profile can be slid onto the underside of the following roof awnings:
- Thule Omnistor 6300 | 6200 mounted on a van
- Thule Omnistor 6300 | 6200 | 9200 mounted on a motorhome,
only if min. 24 mm deep and min. 17 mm high (see picture). 17 mm high (see figure)
- Allows light to be shone outside even when the awning is closed

- Fitted with a channel allowing to install a Thule QuickFit tent
or to hang Thule organisers
- Fits only with Thule Led Strip Sideways - not included
- Colour: anthracite
- Contents:
- 6 sections of 1m (packed in a black tube)
- 2 end caps for perfect finish

6 x 1m aluminium strips. Width of 1.2 cm for the LED strip. Thin profile to fit under the awning. It is placed by the rail of the same awning and can be cut its length. inside the rail then you must place the LED strip. Illuminate your motorhome, caravan or camper. Now you can do it with the LED accessory guide.
An aluminium profile fits into the opening at the bottom of the awning cassette.
The LED light can be used with the awning open or closed.
Includes 6 strips of 1 meter.
Eurotete.com recommends you to carefully clean the bottom of the awning where the led strip and the gutter will be placed. Glue the led strip under the case of the awning box.
Ideal for motorhomes, caravans and campers.